Use Semparoc Adhesive for water-resistant and weather proof bonding of wood-based materials, stone, ceramic and concrete. The adhesive is suitable for assembly work and for use with hardwoods, softwoods and non-flammable building boards.

Semparoc 60 Regular 800g

The Semparoc 60 is especially suitable for window frame stock, free-form assemblies, stair construction and structural components for non-certified applications.

Product Data

• Base: Polyurethane
• Solids content: 100%
• Viscosity: Approx 8500 mPa/s (Brookfield 5/20) at 20C
• Flammability: Hardly inflammable
• Fire resistance category: Components in accordance with EN 13501 are possible (with appropriate materials and constructions)
• Resistant: Resistant against mild caustics, acids and solvents
• Storage: Cool and well sealed 9 months. Store packaging upside down.
• Moisture resistance: C4 in accordance with EN 12765
• Heat resistance: 120 C

Application Data

• Preparation: Bonding surfaces must be plane, clean, free of oil and dust
• Application temperature: +10C to +30C
• Wood moisture content: 8-18%
• Method of application: Spatula or PUR Applico Vario
• Application quantity: 100-300 g/m²
• Open time: Approx. 1 hr
• Pressure: 0.2-0.8 N/mm2
• Press time: 3-4 hrs
• Curing: Through material moisture and humidity
• Clean-up: In wet condition use Ebo clean, when dry use PUR Solvent

Semparoc Rapid 800g

The Semparoc Rapid is especially suitable for window frame stock, windows and shutters.

Product Data

• Base: Polyurethane
• Solids content: 100%
• Viscosity: Approx 11,000 mPa/s (Brookfield 5/20) at 20C
• Flammability: Hardly inflammable
• Fire resistance category: Components in accordance with EN 13501 are possible (with appropriate materials and constructions)
• Resistant: Resistant against mild caustics, acids and solvents
• Storage: Cool and well sealed 9 months. Store packaging upside down.
• Moisture resistance: C4 in accordance with EN 12765 (internal test)
• Heat resistance: 120C

Application Data

• Preparation: Adhesive surfaces must be plane, clean and free of grease
• Application temperature: +10C to +30C
• Wood and material moisture content: 8-18%
• Method of application: Spatula or PUR Applico Vario
• Application quantity: 100-300 g/m²
• Open time: Approx. 15 mins
• Pressure: 0.2-0.8 N/mm2
• Press time: Approx. 45 mins
• Further processing: After 2 hrs
• Curing: Through material moisture and humidity
• Clean-up: In wet conditions, use Ebo clean, when dry use PUR solvent