Buy from OutdoorGB

GARMIN QUEST:

Note: You may configure the main pages through options. The screenshots below are just examples, the actual appearance may vary from the pages shown below depending on the current settings. Especially the content of the data fields is user configurable. You can choose from 33 different values 1 ) .
     
Satellites
Main Menu
Trip Computer
  • Status
  • Accuracy of current position information
  • Constellation of the satellites
  • Strength of satellites' signals
  • Map seteup
  • System setup
  • Display setup
  • Route setup
  • GPS informationen
  • Units
  • Time setup
  • Welcome page setup
  • Track setup
  • About Quest (software version)*
  • Map informationen*
* These menu items are not visible on the above image.
  • Battery power status
  • Current speed
  • Current heading
  • Total distance travelled since last reset (odometer)
  • Average driving speed (including time stopped)
  • Average driving speed (while in motion only)
  • Maximum speed
  • Total time since last reset
  • Time while in motion
  • Time stopped
For each data field, you can choose from 33 different values. 1 )
     
Find
Waypoint
Compass
Search for:
  • Recent finds
  • Your own waypoints
  • Points of interest (food, lodging, services, entertainment, attractions, shopping, transportation, emergency and governmental buildings)
  • Addresses
  • Gas stations
  • Food & drink (restaurants)
  • Lodging (hotels, motels etc)
  • Attractions
  • Symbol of the waypoint (will be shown on the map), there is a great selection of different symbols available
  • Name of the waypoint (up to 30 characters)
  • Coordinates of the waypoint
  • Elevation
  • Comment
  • Direction and distance to waypoint from current location
  • Category to which this waypoint is assigned
  • Functions: Delete waypoint; Find near this waypoint; Compute route to this waypoint
  • Direction to next turn
  • Compass ring with bearing to next turn
  • Vertical speed (ascend or descend)
  • Distance to next turn
  • Estimated remaining travel time to next turn
  • Estimated arrival time at final destination
For each data field, you can choose from 33 different values. 1 ) Note: The Quest has no built-in compass, it can only determine the current heading when moving.
     
Map
Auto Zoom
Route
  • Heading and name of the road you're currently travelling on
  • Map with route (violet) and current location (black triangle)
  • Current scale (lower left corner on map)
  • Current speed
  • Distance to next turn
  • Estimated remaining travel time to next turn
  • Estimated arrival time at final destination
For each data field, you can choose from 33 different values. 1 )
  • Very detailed map with route (violet) and current location (black triangle)
  • Current scale (lower left corner on map)
  • Navigation direction
  • Distance and estimated remaining travel time to next turn
Note: The GPS automatically switches to auto zoom when approaching a turn (you can turn off this feature)
  • Turns with description and distance
  • Final destination with description and distance (bottom)
  • Automatically computes routes, can be optimized for distance, time or computing time

 

Data fields:

 

Selection 1: For each data field, you can choose one from the following 33 values.No Name Explanation
1 Accuracy GPS The current accuracy of your GPS determined position.
2 Arrive - Destination Estimated arrival time at the final destination.
3 Arrive - Next Estimated arrival time at the next turn.
4 Bearing The compass direction from a position to a destination measured to the nearest degree; also called an azimuth. In a GPS receiver, bearing usually refers to the direction to a waypoint.
5 Course The direction from the beginning landmark of a course to its destination (measured in degrees, radians, or mils) or the direction from a route waypoint to the next waypoint in the route segment.
6 Distance - Destination Current distance to the final destination.
7 Distance - Next Current distance to the next waypoint or turn.
8 Elevation Current altitude above sea level.
9 Heading The direction in which you are currently moving.
10 Location (lat/lon) Current location as latitude/longitude coordinates.
11 Location (selected) Current location indicated in the selected format (datum).
12 Name - Destination Name of the final destination.
13 Name - Next Name of the next turn.
14 Odometer Total distance travelled since last reset*).
15 Off Course The distance you are off the desired course.
16 Power Indicates the power status of the rechargeable battery (does not appear as a data field option on the trip computer page).
17 Speed Current speed.
18 Speed - Maximum Maximum speed since last reset*).
19 Speed - Moving Average Average speed without the time with no motion since the last reset*).
20 Speed - Overall Average Average speed including the time with no motion since the last reset*).
21 Sunrise Time of sunrise at the current position.
22 Sunset Time of sunset at the current position.
23 Time of Day Current time.
24 Time to Destination Estimated travel time to the final destination.
25 Time to Next Estimated travel time to the next waypoint (turn, crossing etc.).
26 To Course Direction to the planned course.
27 Trip Odometer Travelled distance since last reset*).
28 Trip Time - Moving Time with motion since last reset*).
29 Trip Time - Stopped Time without motion since last reset*).
30 Trip Time - Total Total time since last reset*).
31 Turn The direction of and the distance to the next turn on a route.
32 Velocity Made Good The rate of closure to the destination, based upon your current speed and course.
33 Vertical Speed Current ascending or descending speed.

 

*) You may reset the trip-counters, the Odometer and the Maximum Speed independently of each other.