Petzl Vertex Vent Ventilated Helmet
 |
 |
 |
 |
 |
|
Petzl Vertex Vent Ventilated helmet
for work at height and rescue
Comfortable and durable helmet with ventilation, meets requirements for working at height (note: provides no protection from electrical hazards).
- Chinstrap designed to reduce the risk of the helmet coming off as a result of an impact during a fall : it has a breaking strength greater than 50 daN (EN 12 492 mountaineering helmet standard).
- Polycarbonate shell, resistant to impact and wear (meets EN 397 industrial helmet standard and EN 12492 standard).
- Ventilation holes that can be closed with sliding shutters (for cold and/or windy conditions).
- Meets optional requirements of the EN 397 standard:
- lateral deformation,
- use at low temperatures (down to - 30 °C).
- Does not meet optional requirements of the EN 397 standard regarding:
- electrical insulation,
- molten metal splash (due to the ventilation holes).
- Customizable:
- side slots for mounting hearing and/or eye protection,
- the cut of the shell contours over the ears to fit standard hearing protection,
- four headlamp clips.
- Complete and simple adjustment:
- single headband size adjustment wheel,
- adjustment wheel and rear chinstrap attachment point have two height positions, to adjust the position of the straps on the neck and around the ears,
- chinstrap buckles can be adjusted forwards and backwards.
- Comfortable:
- webbing suspension system,
- thick, replaceable foam headband.
Certification
- CE EN 12 492
- ANSI Z89.1 - 2003
- Type I class C
Technical specifications
- Head band adjustable from 53 to 63 cm.
- Available in white or red.
- 465 g
All technical information for this product is included within the description.
|
|
 |
|
|
|
|
