Asc 20W Controller (with LED)

  • Unavailable



There was problem with adding product to the basket. Please contact our support.

Asc 20W Controller (with LED)

The ASC20W Controller uses less than 1/10th the power of the industry average.

The zero battery consumption at night saves lots of power, especially in systems that get covered in snow or need to last through prolonged overcast conditions.

Almost all other charge regulators have a standby current draw that will drain the battery during poor light conditions.

  • Perfect for telecommunications, solar powered parking meters and other small PV systems up to 20 W
  • Save up to 10% of the power from a 5 W module
  • Protection (PV and battery) against short-circuit and reverse polarity, overload, over temperature and battery removal
  • Can charge a completely discharged battery
  • Extreme design -40°C to +70°C
  • Series design (not shunt)
  • Reliable - 100% solid state
  • No radio interference
  • LED indicates charging
  • Wall mountable ABS plastic case
  • Fully encapsulated in epoxy potting
  • Dimensions: 3.8 x 7.0 x 3.1 cm
  • Weight: 34 g
  • Battery consumption 0, 0.0 mA
  • Typical solar consumption 5 mA daylight only, 1 mA without LED
  • 5-year warranty
Product description

Asc 20W Controller (with LED)

The ASC20W Controller uses less than 1/10th the power of the industry average.

The zero battery consumption at night saves lots of power, especially in systems that get covered in snow or need to last through prolonged overcast conditions.

Almost all other charge regulators have a standby current draw that will drain the battery during poor light conditions.

  • Perfect for telecommunications, solar powered parking meters and other small PV systems up to 20 W
  • Save up to 10% of the power from a 5 W module
  • Protection (PV and battery) against short-circuit and reverse polarity, overload, over temperature and battery removal
  • Can charge a completely discharged battery
  • Extreme design -40°C to +70°C
  • Series design (not shunt)
  • Reliable - 100% solid state
  • No radio interference
  • LED indicates charging
  • Wall mountable ABS plastic case
  • Fully encapsulated in epoxy potting
  • Dimensions: 3.8 x 7.0 x 3.1 cm
  • Weight: 34 g
  • Battery consumption 0, 0.0 mA
  • Typical solar consumption 5 mA daylight only, 1 mA without LED
  • 5-year warranty
527507